Monday, January 27, 2014

talon hand fab




























I've been looking at the Talon Hand created by Peter Binkley and then some of the pics that Ivan has posted of building this particular hand. They are using leather for the gauntlet and palm cap. Peregrine Hawthorn had posted comments on e-NABLE about how nice the leather was in contrast to the thermoplastic so I thought Shea should take one of these Talon hands to test as well. I decided to throw the model into Rhino and see if I could size it to the model of her hand. I made some adjustments to the scale and then printed it out. I'm not quite certain if this will be the best hand for Shea as it seems like her thumb may require more space in this design and therefore, she may not fit into it in it's current scale. When I made the palm section larger to accommodate her thumb it was simply too large. Regardless, I printed the smaller version and I hope that Shea will be be able to use it. If not, I will adjust things and we'll get one that works for her. 

Yesterday I went to my studio and in between grad student meetings I was able to drill holes for hardware. I drilled the cable guide so I could countersink some cap head bolts and attach it. I also drilled and threaded all of the holes on the underneath side of the palm where the leather attaches. I used a 6-32 tap and plan on using countersunk head bolts for this. The tap actually cuts decent threads and I think these will hold well if I put some thread locker or finger nail polish on them when I assemble for the last time. 

I designed a "washer" surround plate that has the countersink designed into it, that will keep the fastener heads from pulling through the leather. I believe Peter and Ivan just used washers under their hardware which works perfectly fine. I just happened to have 6-32 countersunk hardware and thought this would look really clean and be flush with the face of the palm. I need to thicken the plates so I can drop the bolts down in a bit further so they become flush. 

I absolutely love the fit of the pivot pins that Peter designed. They allow for easy assembly of the fingers without the need for additional metal hardware. The fingers came together flawlessly  I had purchased some beading cord off of Amazon, but when it arrived it was too large. Jill ran out to Michaels for me yesterday and she picked up some stretch magic beading cord. She purchased two sizes and I went ahead and ran the smaller diameter cord through Shea's Talon hand fingers. They spring back really nicely, so I just need to do a little file work to the palm knuckle joint and make sure all of the cord holes are free of debris and I can run the shade cord. I made a cardboard template for the gauntlet and I'll look for some leather tomorrow. When I get the leather, we'll laser cut a pattern into it so we can fancy it up a bit for Shea. I've had a lot of fun putting this together.




beast hand fab












While I have been waiting on supplies to come in, I have been printing hand parts like crazy. I have a printer set-up in my bedroom so I can print all night long and I've pretty much been printing things around the clock. I'm obsessed with printing as many different hands as we can for Shea and then would like to get her feedback on them. I also want to have extra hands as examples as I have just started co-teaching a course on Universal Design with Adream Blair. We have decided to have our students tackle the subject of prosthetic hands. As some of you know, I am on sabbatical...but I have "come out of retirement" so I can get a class involved in building hands for other children. Our students are conducting research on prosthetics and we plan on having them publish a book with their research, ideas, designs, process, prototypes, resources, and information on the participating children and their hands that were created. We are currently looking for five children to participate in this besides Shea, so if anyone out there knows of someone in the midwest looking for a hand, then please let me know. We will cover the cost of materials etc, so we just need some parents/children who would be comfortable participating.

Since I received my chicago screws, I have been able to begin putting the Beast Hands together. I began by drilling the holes in the various pieces that would correspond with the size of the chicago screws. With my background in Jewerlry and Metalsmithing, we most frequently use numbered drill bits (1-60 and 61-80). The steps between bits are very gradual and this allows you to create holes that correspond with tubing and wire sizes that we commonly use and the fit is always exact. I might add that you can get a cheap set of numbered bits from harbor freight for under $20 that will be fine for drilling plastic parts. I used my drill bit gauge to select the correct size drill bit (using the chicago screw sleeve as a guide for selecting the correct size) and then got to work drilling the plastic parts. I have everything drilled and still need to do just a bit of clean-up on the plastic and then I can cut padding and velcro. I still need to print some fingers for a couple of the Beast Hands, but I should be able to get three of these put together shortly. Ivan Owen sent me a file for a new Beast gauntlet that he has modified to use the tensioner that he designed, so I'll have to print those parts to replace the gauntlets you see here. I think his tensioning device will work really well for these. 

We should be able to meet with Shea soon, so she can try out her new Beast Hand and at that time we'll cast a copy of her arm as well as fit some thermoplastic to her arm so we can create some other style hands for her. It is our hope that the students in our class will be able to research other things that Shea does and how we might better adapt a hand to her needs or specific uses.







chicago binder screws






My chicago screws came in two days ago. I'll be using these for Shea's Beast Hand. They are super lightweight and perfect for this application of needing a low profile head. It's funny that I'm using these, as I remember playing with these when I was little. I haven't used them since that time, so they bring back a lot of memories. My Dad used to have a collection of those small bolt storage bins in the corner or his shop on the workbench. I remember taking hardware out off these when I was little and I would make things or use them when I played with my toys. I would combine pieces of hardware to create things OR I just messed up the organization of his trays by putting things in spaces they didn't belong as I was "playing". Opening these bags brought back lost of memories of tinkering in his shop. Thanks for not getting too mad about me always messing about your shop, Dad.




materials















I've been quiet with my posts about Shea's hand. I'm not sure why as I have been doing a lot to prepare for our next meeting. I've been keeping up with all of the activity and collaboration occurring on the e-NABLE group. I'll have more info. on that soon. I ordered supplies for us to use in the creation of Shea's hands. I sourced most of this from Amazon, but many of the orthoplastic sheets were shipped from Patterson Medical, who apparently has an office just a few miles North of me in Cedarburg. My colleague, Adream called them, and they put us in touch with a regional representative who knows a ton about splinting, so this should create a positive relationship that we can use as a resource. I purchased cabling supplies, Velcro, colored thermoplastics, filaments (in Shea's favorite colors),  and splinting sock liners. Adream and I played with milling and laser cutting the thermoplastic to see if we could cut some patterns into the material. My laser cutter settings were a bit too hot, but I slices like butter; same with the milling machine. It does leave some burrs along the edge similar to when you machine nylon, but nothing that can't be cleaned up.

In the last few weeks I have been preparing links to where I sourced many of the materials for Shea's hands. During this time, Jen Owen was working on a new site for the e-NABLE group and she put out a call for resources for all things pertaining to 3D printed prosthetic design and creation. I put together the following and she now has all of this on the e-NABLE group's new website. You can access the e-NABLE site here.

Here is what I submitted to her:
Names of 3d print design programs that are easy for beginners and programs that you are using yourselves - with links?
3D Modeling Software
Commercial Software
used for creating 3D models and renderings. Works very well with meshes as well as basic 2D and 3D solid model generation.
Mac OSX version is in Beta testing so it is FREE to download at the moment.
PC version $995
Autodesk Inventor (http://www.autodesk.com/products/autodesk-inventor-family/overview)
Autodesk offers student download free 36 month student license: http://www.autodesk.com/education/free-software
Solidworks (http://www.solidworks.com)

Open Source Software
OpenSCAD (http://www.openscad.org)
FreeCAD (http://www.freecadweb.org) parametric 3D modeling
Blender (http://www.blender.org)

3D Scanning
3D Scanner Hardware
Next Engine Scanner (http://www.nextengine.com)
3D Systems Sensor handheld Scanner http://cubify.com/sense/
X-Box 360 Kinect (http://www.xbox.com/en-US/kinect) for scanning

3D Scanning Software
Scan Studio used with Next Engine Scanner (http://www.nextengine.com/products/scanstudio-hd/specs/overview)
Rapidworks (http://www.nextengine.com/products/rapidworks/intro)
Makerware for Scanning
Scanect (http://skanect.manctl.com) software used for scanning with the Kinect
ReconstructMe (http://reconstructme.net) software used for scanning with the Kinect

CAM/CNC
CAM Software (for generating gcode for subtractive carving of objects)
RhinoCAM used for creating gcode to mill 2D and 3D milled or routed parts.

CNC milling, routing, laser cutting, 3d printer control software
Mach 3 used to run cnc machine; gcode is loaded into this program and this program sends signals to cnc machine to be able to cut objects from sheet or block of material.

3D Model Slicing for 3D printing
Open source software:
Makerware (http://www.makerbot.com/blog/category/makerware/)
Slic3r (http://slic3r.org)
Pronterface (http://reprap.org/wiki/Printrun)
Repetier (http://www.repetier.com)

STL Repair and Mesh Manipulation
Open Source Software
netfabb (http://www.netfabb.com)
autodesk3d print (http://apps.123dapp.com/3dprint/install.html)
Meshmixer (http://www.meshmixer.com)

Favorite 3d printers and links where to find them.
3D Printers
RepRap Open Source
RepRap (http://reprap.org/wiki/RepRap)
Prusa Mendel (http://reprap.org/wiki/Prusa_Mendel_(iteration_2))
Prusa i3 (http://reprap.org/wiki/Prusa_i3)
Printrbot (http://reprap.org/wiki/Printrbot)

Commercial Printers
Makerbot (https://www.makerbot.com)
SeeMeCNC (http://seemecnc.com) 
Up! printer (http://www.pp3dp.com)
Cubify (http://cubify.com)
Ultimaker (https://www.ultimaker.com)


names of and links to medical grade hardware/orthoplastic/foam padding
Medical Suppliers
Patterson Medical (http://www.pattersonmedical.com)
  
Splinting Information Resource:
Introduction to Splinting Excerpt
https://drive.google.com/file/d/0B0lYyB55L5cRMzdUaDhZVjNYbXM/edit?usp=sharing
  
Medical Supplies
Thermoplastics
Sammons Preston Rolyan Aquaplast Sample Pack

Aquaplast Watercolors Splinting Material Single Sheet, Solid, Electric Blue, 1/8" x 18" x 24" (3.2mm

AliPlast 6A, 1/8 x 24 x 29 inch sheet, White

AliMed Multiform, 24 x 36 x 1/8 inch perforated sheet

Aquaplast Watercolors Ped's Pac "A"
  
Velcro:
Genuine Velcro 1806-OW-PB/B-30 One-Wrap Self Gripping Strap, 30' Length x 2" Width, Black

Cord, Cabling and Stringing:
Roll of 100 Yards Shade Cord (Or Lift Cord) 0.9 mm

Splint Socks or Arm Protectors
Rolyan(R) Stockinette Splint Liner Splint Liner Small 3" (7.6cm) proximal end, 11¼16" (1.7cm) thumb width

  
3D Printing Supplies and Suppliers
FDA Approved 3D Printing Filaments:
Taulman 3D T-Glase Polyester Resin Filament 1.75mm 1lb Spool

Suppliers
Ultimachine (https://ultimachine.com)

General Material and Fabrication Suppliers:
McMaster-Carr (http://www.mcmaster.com)
Grainger (http://www.grainger.com)